Date:         Tue, 27 Apr 2004 05:49:34 EDT
Reply-To:     RAlanen@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Condelli <RAlanen@AOL.COM>
Subject:      Re: Poptop assist spring/cable
Content-Type: text/plain; charset="US-ASCII"

In a message dated 26/04/2004 9:04:50 PM Eastern Daylight Time,
LISTSERV@GERRY.VANAGON.COM writes:

Has  anyone every checked or adjusted or replaced the spring and cable
assist  mechanism in the Westy poptop supports?  Any hints or  warnings?

Quite simple and straight forward.  Remove the  entire lift bar assembly and
work on it on the floor or bench if you have one  large enough.  Remove the
old springs and install the new ones in the same  manner.
Cheers,

Frank  Condelli
Almonte, Ontario, Canada
_BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper
camping event, Almonte, ON, June 10 ~ 13, 2004
'87 Westy & Lionel  Trains
Member: _Vanagon List_ (http://www.vanagon.com/) , _LiMBO_
(http://www.bcn.net/~limbo/) , _IWCCC_ (http://www.westfalia.qc.ca/)  & _CCVWC_
(http://www.ccvwc.ca/)
Vanagon/Vanagon Westfalia Service in  the Ottawa Valley
_STEBRO/Vanagon Stainless Steel  Mufflers_
(http://members.aol.com/Fkc43/stebro.htm)
_Frank Condelli &  Associates_ (http://members.aol.com/Fkc43/busindex.html)
or  http://frankcondelli.com