As I recall the Bentley is incorrect. You have to think in terms of the compressor. It pumps gas only, low to hi pressure, gets dumpped over the condenser, turns to liquid, then is dumpped over the evaperator, changes back to gas, back to the compressor.
Eric 86-VW4x4 vw4x4@fyi.net 86-SS Syncro Pittsburgh, PA USA 1936-Chrysler 92-Jetta GWC www.fyi.net/~vw4x4/vw4x4.htm On Fri, 30 Apr 2004, Philip Chidlaw wrote: > I am trying to familiarize myself with the details of the stock R-12 system in > my 87 westy in order to tackle a repair. Can someone confirm that in Bentley > on page 87.2 the high and low pressure hose labels are reversed? That would be > diagram 87-882. Thanks. > > Philip Chidlaw > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.