Date:         Mon, 3 May 2004 18:47:08 -0500
Reply-To:     Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Subject:      Re: instrument cluster swap
Comments: To: Bob Stevens <mtbiker62@HOTMAIL.COM>
Content-Type: text/plain; charset="iso-8859-1"

Look down on the bottom of the Speedo face. It should have a number there
right above the MPH. It will say 820 / 806 or something similar. If the
number on your Speedo and the replacement are close it should register
close. Otherwise you might need to swap out theEGR black box to the left of
your spare tire under the van.

Stan Wilder

----- Original Message -----
From: "Bob Stevens" <mtbiker62@HOTMAIL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Monday, May 03, 2004 4:53 PM
Subject: Re: instrument cluster swap


> Based on what you're looking at there John, do you think I can "plug" that
> 120 mph speedo into my stock van speedo cluster and have it work? I have
one
> of those clusters and recently put the tach into my van cluster so I'd
have
> the 7K tach. Wondering if I can just "swap" the speedo's?
>
>
>
> Bob Stevens
> '87 Westy Syncro TIICO
> http://groups.msn.com/BobsPhotoShare
> http://groups.yahoo.com/group/tiico
>
> _________________________________________________________________
> FREE pop-up blocking with the new MSN Toolbar - get it now!
> http://toolbar.msn.com/go/onm00200415ave/direct/01/