Date: Mon, 3 May 2004 15:45:04 +0200
Reply-To: jens.jakob.andersen@POST.DK
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Jens Jakob Andersen <jens.jakob.andersen@POST.DK>
Subject: SV: Oildipstick marks on 2L aircooled 82 gasoline engine
Content-Type: text/plain; charset="iso-8859-1"
Hi Joel
Thank you very much for the information.
So the high-level mark is the upper notch, not the upper twist. Thank you for the info.
And the info about 0.6 liter is also very nice to have.
0.5 liter pr. 3000 km - WOW! People I have talked with here in Denmark says about 1 liter/1000 km is normal.
I have leaks from valve covers as well as push-rod tubes - but it doesnt seems severe. I have a little bit of blue smoke on engine-start, but not too much when running.
I gotta find out where all that oil goes, and then do something about it.
I am currently running SAE 10W40 oil.
Happy driving
Jens Jakob
-----Oprindelig meddelelse-----
Fra: Joel Walker [mailto:jwalker17@earthlink.net]
Sendt: 3. maj 2004 15:30
Til: Jens Jakob Andersen, PDI
Emne: Re: Oildipstick marks on 2L aircooled 82 gasoline engine
I've just bought at 1982 Caravelle 82, 2L gasoline.
The oildipstick has some amrks, and I am curious about the definition
of these.
There are the normal 2 "twists" at the end.
Just above the lower twist there is a notch.
Haldway between the 2 twists there is another notch.
Does anyone know the precise (as it can be with old cars) def. of
capacity between notches?
I guess that the upper notch is maximum engine oil? Or is it the upper
twist?
It seems to be that currently the engine uses 1 liter / 300 km... So
I need to find out how much I can fill in (and I do definately not
want to overfill)...
the upper notch is, indeed, the maximum engine oil level. more than
that and you run the risk of overheating the engine a bit (the
crankshaft splashes in the oil).
the lower notch is the minimum engine oil level ... below this and you
need to add oil NOW.
the difference between the two notches is listed as 0.6 liter for the
1982 models.
in my experience, a normal engine will consume about 0.5 liter per
3000 km.
your consumption seems to be much too severe. :( i would check
underneath to make sure the valve cover gaskets and the pushrod tube
seals are not leaking.
but also check to make sure you are running the proper
viscosity/weight of oil!! an oil that is too 'thin' will create high
consumption, too.
good luck!
joel