|
Does any one know anything about these? Is the Stage I cam suitable for out Vanagons with 2.1L engines? Any opinions on this particular grind? See eBay auction 2477318971. ********************************* This auction is for one German Parts Wholesale Performance Camshaft. This Cam is Ground exclusively for the 1983-1985 1.9L and 1986-1992 2.1L Volkswagen Vanagon.This cam can be used with EITHER our Solid or Hydraulic Performance Lifters! Choose from a variety of grinds,Great Torque grind designed for use with our without our 1.25:1 ratio rocker kit! Perfect for those of you who already own Ratio rockers and are looking for a little more punch! Mild enough for daily driving,Wild enough to extend the power band way into the redline, yet still retains great MPG.This camshaft was develpoed for our customers who want to use thier vanagons for towing,long road trips with severe hill climbing,or sport driving including Drag racing!Our best selling Stage-1 cam is a great camshaft for tuners who still want a good idle and are looking for a nice broad power band that's starts low. The stage-2 is for for tuners who are looking for an increased midrange and top end.The stage-3 is for the seasoned tuner wanting maximum hp.Less cam lobe lift combined with a higher lift Rocker means long cam lobe life and smooth valve train action at high RPM!Works excellent with bone stock injection.We have Eproms custom programmed for this cam! We also stock,1.25:1 Ratio Rockers,Straight Cut Cam Gears,Exhaust kits,95mm Big bore Kits,High Performance Chips,and K&N filterchargers too! STAGE 1 Cam Specs are.. Lift with Stock Rocker .355 Lift with 1.25:1 Rocker .400 Lift with 1.4:1 rocker .448 Duration @ .050 222 Degrees (GREAT HILL PULLER FOR STOCK & MODIFIED ENGINES) STAGE 2 Cam specs... Lift with Stock Rocker .371 Lift with 1.25:1 Rocker .418 Lift with 1.4:1 rocker .469 Duration @ .050 228 Degrees (Great cam for modified engines,Increased midrange and top-end) STAGE-3 Cam specs Lift with Stock Rocker .394 Lift with 1.25:1 Rocker .443 Lift with 1.4:1 rocker .497 Duration @ .050 236 Degrees (Hot stick designed for super modified engines,will require Fuel injection tuning,Rough idle) |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.