Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2004, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 8 May 2004 09:47:43 -0700
Reply-To:     Don in Phoenix <02BuellS3T@COX.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Don in Phoenix <02BuellS3T@COX.NET>
Subject:      Re: Catalytic converter noise
Content-Type: text/plain; charset="iso-8859-1"

----- Original Message ----- From: "Debra Clark" <clark10006@COX.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Sat 08 May 2004 08:22 Subject: Catalytic converter noise

> Just in the last couple of weeks, I've started to hear a sort of rattling > noise from the rear. It becomes faster and more pronounced as I step on the > gas. Upon closer inspection, it seems to be coming from the catalytic > converter which, I assume, is original equipment. I have a 90 multivan with > about 148,000 miles and it was successfully smogged about a year ago so I > have another year to go before another. My questions are: Is this noise > typical for a failing cat? Are they difficult to change out? And if I just > live with it for now, will there be increasing noise or other consequences? > I did search the archives but these things weren't covered. > > Thanks, Debra

Debra,

As Bob said, check the O2 sensor first, if it's loose, tighten it! If it is the converter elements breaking up, as Robert said, it should be replaced as soon as possible.

Now that I have repeated what others have said, here is my advice, as someone who just had it replaced. The cat is fairly easy to replace since it is out in the open, the biggest issue is the (corroded) bolts holding it in (penetrating spray is your friend). On mine, it required the use of an air chisel to remove the bolts, and ultimately a gas torch for one of the bolts. I would recommend having a replacement O2 sensor handy, as mine had "become one" with the cat - removing it destroyed the threads on the sensor, so I had to have it replaced. When installing the O2 sensor, remember that you must use "O2 sensor safe" anti-seize, as regular anti-seize will destroy the sensor in short order.

Don in Phoenix, AZ 1987 Vanagon GL Syncro


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.