Date:         Sat, 8 May 2004 19:50:15 +0200
Reply-To:     Calle Fallberg <calle.fallberg@TELIA.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Calle Fallberg <calle.fallberg@TELIA.COM>
Subject:      Re: Catalytic converter noise
Content-Type: text/plain; charset="iso-8859-1"

You´ve already got loads of good advice here, what I want to add is that if
it´s recently smoke tested and the O2 sensor is tight, try to get the cat
off and shake all the loose stuff out !
You might even take a tireiron, a long screwdriver or something similar and
help the ceramic out of there !
Not too good on the environment but it keeps the Bus rolling without
clogging the muffler and you could save up the cash or find the best deal on
a new one  to replace it with before the next test....

Calle
-88 Volgon
Mullhyttan, Sweden

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.