In a message dated 5/18/2004 11:06:48 PM Eastern Daylight Time, JordanVw@AOL.COM writes: > Ben, if you think about it...a front end collision will send weight to the > front...to the horizontal jumpseat mount bar.. the jumpseat isnt latched to the > floor..it just sits in those cups loosely, by gravity or > the weight of the > person in the seat... In a message dated 5/18/2004 11:06:48 PM Eastern Daylight Time, JordanVw@AOL.COM writes: > Ben, if you think about it...a front end collision will send weight to the > front...to the horizontal jumpseat mount bar.. the jumpseat isnt latched to the > floor..it just sits in those cups loosely, by gravity or > the weight of the > person in the seat... Chris, jumpseats in my vans attach to the horizontal bar. The steel cups on the floor havesufficient height to keep the seat from being simply pulled out once the rear catch is engaged. The rear mount, floor cups, and the seat framing form a very string triangular structure. I would not want to be in that seat when someone hits the rear of the van hard and those pretty brass cups rip out of the plywood floor. On your other note, there is nothing similar to the installation of lap belts vs. 3-point belts to steel points to mounting a steel seat to a plywood floor. Lap belts when used properly can keep you from flying out of the seat in a collission just as well as the 3-pointers. Brass cups in wood can rarely be expected to perform as well as steel on steel parts. (yes i realize there is also a rubber fitting on the ends) BenT |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.