Jim, I finished the same job a while back; I also put in the table. The seats are easy. Just mount drill and attach; remember to get all the hardware for the seats. I also only put in only one of the jump seats; I want to put a swivel base on the front passenger seat. Kind of a digi-wife throne. If you put in the table it is wise to know that the bench seats are different and that you will need to do a little cutting and welding. Measure twice cut once. Jere 90 Carat-a-version 88 GL -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Jim Arnott Sent: Sunday, May 23, 2004 9:48 AM To: vanagon@GERRY.VANAGON.COM Subject: Seats? So here's the deal... A close friend has a standard 7 passenger GL. He wants to remove the center bench and put in the two rear-facing single seats like are found in Weekenders. Having never been down that road, he asked me about the do-ability of said swap. Well... I've never been down that road either. Can anyone offer words of wisdom? Chris, you have a pair of seats in blue? TIA. Jim |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.