Date:         Sun, 23 May 2004 21:51:49 -0500
Reply-To:     Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Subject:      Re: Hints re tail pipe removal
Comments: To: Gary McEachern <GlmceN@NETSCAPE.NET>
Content-Type: text/plain; charset="iso-8859-1"

Grind the bolts off if you can get to them.
If you have to drop the exhaust to get to them then so be it.

Stan Wilder
----- Original Message -----
From: "Gary McEachern" <GlmceN@NETSCAPE.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Sunday, May 23, 2004 6:26 PM
Subject: Re: Hints re tail pipe removal


> I've had good luck in the past with heat, some rustbuster and a little
time and patience!
>
> I'd replace the hardware with stainless!
>
> Gary
>
> d spence <dspence@OANET.COM> wrote:
>
> >Time to replace the tailpipe on my westy. As expected rusted solid. Any
> >hints. Muffler is fine, just can't get the three bolts out.  Do I have
> >to grind the heads off and drill and tap the muffler flange??
> >
> >TIA
> >
>
>
> --
> Gary McEachern
> Reading, Ma
> '90 Westy Subavanagon
> '87 Wolfy Subavanagon
>
>
> __________________________________________________________________
> Introducing the New Netscape Internet Service.
> Only $9.95 a month -- Sign up today at http://isp.netscape.com/register
>
> Netscape. Just the Net You Need.
>
> New! Netscape Toolbar for Internet Explorer
> Search from anywhere on the Web and block those annoying pop-ups.
> Download now at http://channels.netscape.com/ns/search/install.jsp