Damon wrote: >>I've seen a few mentions of plug heat ranges. What >>does this effect? What are the consequences of >>running "too hot" or "too cold" of a plug? Damon: I am no expert but if I understand this concept correctly the heat range of a plug affects the temperature of the tip when the motor is running. The engineer that designs the plug can change the heat range by making the electrode protrude more or less into the combustion chamber (I'm sure other factors come into play such as electrode alloys and insulator materials.) If the plug is to cold for your motor and your driving style then the plug will tend to carbon up and cause misfires (a fouled plug), if the plug is to hot the tip will start to glow or even melt and cause pre-ignition and damage your motor. As usual this is all a big compromise. An engine that is lightly loaded and never works hard will need a hotter plug than the same engine that is used to produce full output all the time. Experts please expand or correct if necessary. George, '85 Westfalia |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.