Hi, * I'm finishing the install of a 99 Impreza 2.2L in an 89m Syncro Westy. The shift linkage was disconnected at the splined shaft and the fork. I've followed the Bentley procedure to adjust that linkage. It won't shift in L, 2nd and 4th gear. Any ideas why? The tranny is OK. I've managed to get all gears engaged with the shift selector ball joint. Any suggestions on how to adjust that linkage in a more civilized manner that the Bently suggests. I don't understand the 23 mm measure. * Best regards. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.