Date:         Thu, 10 Jun 2004 14:54:41 -0400
Reply-To:     Jason Willenbrock <pooncerelli@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jason Willenbrock <pooncerelli@HOTMAIL.COM>
Subject:      syncro vc install ques
Content-Type: text/plain; format=flowed

hey all,
thanks to derek drew i have a brand spankin new vc to instal.  well, i
followed the procedures from the archives and the syncro list, all is going
smooth except, the vc wants to come out with the rear housing of front diff.
  it is my understanding that this is bad.  well, i can't figure out how to
get the vc to stay on the front diff.  does it really matter if it comes out
with rear housing?  it seems to me that since the diff is installed in the
vehicle still, the vc would be a real PITA to get out of the rear housing
with all skid plates in the way.  so, how do i get the vc to stay with the
front diff?  i can kind of get it to slide a little if i jiggle the rear
housing back and forth, but i can't get a grip on it.  i definelty do not
want to ram something up there and start pryin on it for obvious reasons, or
do i?
any help would be great
thanks
jason

_________________________________________________________________
Check out the coupons and bargains on MSN Offers! http://youroffers.msn.com