Date: Wed, 16 Jun 2004 12:26:59 -0500
Reply-To: Jim Felder <felder@KNOLOGY.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Jim Felder <felder@KNOLOGY.NET>
Subject: Re: whats the book time for installing a new exhaust OR...
In-Reply-To: <E1BaayS-0001pa-00@smtp02.mrf.mail.rcn.net>
Content-Type: text/plain; charset=US-ASCII; format=flowed
Go to your library and ask where the Mitchell Guides are. You'll find
it there, if they happen to cover the model. If you have a subscription
you can access it on CD, maybe online. But the library is free.
Jim
On Jun 16, 2004, at 9:00 AM, Joy Hecht wrote:
> Is there actually a book (or more likely a database) that auto repair
> people
> use to do labor estimates for repairs? I had heard somewhere that
> there
> was.
>
> It's a useful thing to know - and to be able to find out the book
> times -
> because it gives a reasonable upper bound on the cost of paying for
> repairs.
>
>
> Does anyone know if it is exists, or how to access the information?
>
>
>
> Joy
>
> ****************************************************************
> Joy Hecht
> and Matilda, 1989 Burgundy Vanagon
>
> For musings about life and the vanadventures:
> http://users.rcn.com/jhecht/gypsy
>
> ****************************************************************
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On
> Behalf Of
> Frank Condelli
> Sent: Wednesday, June 16, 2004 7:00 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: whats the book time for installing a new exhaust OR...
>
> In a message dated 16/06/2004 12:02:25 AM Eastern Daylight Time,
> LISTSERV@GERRY.VANAGON.COM writes:
>
> I am about to purchase a new exhaust for the 1984 Vanagon named
> "Squeaky"
> and
> I was trying to figure out the book time to remove and reinstall a
> whole
> new
> exhaust.
>
>
> <
> <
> That's a trick question ! It all depends on how many exhaust
> studs and
> bolts break and have to be drilled, tapped, helicoiled, or repaired
> in some
> weird fashion. Clean up time of the exhaust port gasket surface may
> also
> be
> necessary as may be the gasket surface of the new pipe flanges.
> Every case
> is
> different. I have seen in my shop a wide range of scenarios ! No
> way to
> make an estimate !
> <
> <
>
>
> Cheers,
>
> Frank Condelli
> Almonte, Ontario, Canada
> _BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm) a VW Camper
> camping event, Almonte, ON, June 10 ~ 13, 2004
> '87 Westy, '90 Carat & Lionel Trains
> Member: _Vanagon List_ (http://www.vanagon.com/) , _LiMBO_
> (http://www.bcn.net/~limbo/) , _IWCCC_ (http://www.westfalia.qc.ca/) &
> _CCVWC_
> (http://www.ccvwc.ca/)
> Vanagon/Vanagon Westfalia Service in the Ottawa Valley
> _STEBRO/Vanagon Stainless Steel Mufflers_
> (http://members.aol.com/Fkc43/stebro.htm)
> _Frank Condelli & Associates_
> (http://members.aol.com/Fkc43/busindex.html)
> or http://frankcondelli.com
>
| 
