Date:         Thu, 17 Jun 2004 18:15:48 -0400
Reply-To:     Joe Federici <joefederici@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Joe Federici <joefederici@EARTHLINK.NET>
Subject:      Re: por15/rust
In-Reply-To:  <5D157722-C0A8-11D8-8AAE-000393799582@blazenet.net>
Content-Type: text/plain; charset=US-ASCII; format=flowed

To each his own. The reference any reference an article comparing them
both and I would say depending on the use rust encapsulator is a way
better product.

One thing to consider is how much of an area are you covering. Spraying
por15 is very hard. You end up thinning it out quite a bit and it still
covers poorly.

JFF



On Jun 17, 2004, at 5:50 PM, jesse johnson wrote:

> I have used this stuff and por15.. Rust Encapsulator does not even
> begin to compare with Por15 period. Considering how much of a pain rust
> is to deal with, buy the good stuff and be done with it.
> later,
> jesse
> 89 carat new engine and trans... yippie!
>
> Joe wrote:
> I know a lot of people are happy with por but I've used more then a few
> products from Eastwood in PA and found they work great. It's a smallish
> company that carries paints and tools for do-it-yourselfers and body
> shops. The make a product call rust encapsulator that works.
>
> http://www.eastwoodco.com/
>
> JFF
>