In a message dated 22/06/2004 10:18:23 PM Eastern Daylight Time, LISTSERV@GERRY.VANAGON.COM writes: Find a welder and have him weld a 90 degree pipe to the muffler and don't forget to put a hanger on it to help keep the muffler from shaking the rest of the system.
< < You cannot use a tail pipe hanger fastened to the body. The Vanagon exhaust system MUST be completely mounted to the engine and be free to move with the engine or you risk breaking some other part of the exhaust system. < <
Cheers, Frank Condelli Almonte, Ontario, Canada _BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm) a VW Camper camping event, Almonte, ON, June 10 ~ 13, 2004 '87 Westy, '90 Carat & Lionel Trains Member: _Vanagon List_ (http://www.vanagon.com/) , _LiMBO_ (http://www.bcn.net/~limbo/) , _IWCCC_ (http://www.westfalia.qc.ca/) & _CCVWC_ (http://www.ccvwc.ca/) Vanagon/Vanagon Westfalia Service in the Ottawa Valley _STEBRO/Vanagon Stainless Steel Mufflers_ (http://members.aol.com/Fkc43/stebro.htm) _Frank Condelli & Associates_ (http://members.aol.com/Fkc43/busindex.html) or http://frankcondelli.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.