Although I've heard that gauges and sensors vary, I've got two vanagons now, an 83 and a 90, and I would consider either of them overheated if the needle was a needle's width over the LED. In fact if it got over the LED at all I would be checking things out at the side of the road. You should look at your thermostat and radiator. Jim On Jun 23, 2004, at 3:40 PM, Kevin wrote: > Hi Everyone, > Just blew a head gasket at about 8K miles after they were done. > Cooling > temp ranges from 1 needle above led to about 1/2 way (in summer > traffic) > between overheat and the led at which point the fan goes into high > speed the > temp comes down. Thinking Raditor but wonder what the list wisdom is > on > this subject. > Thanks > Kevin > 87 Westy > Burlington VT > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.707 / Virus Database: 463 - Release Date: 6/15/2004 > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.