If it's where you can lock the head up in a drill press, why don't you find the center of the bolt and step drill it till you get it close enough to the inside thread diameter to chase it out with a tap. You'll need a bottoming tap too unless the hole is a good bit deeper than the bolt. That heat deal doesn't work so well with aluminum and steel. Once I had the same thing happen to a 911 head, and ended up having another bolt welded onto the exposed threads of the broken one. but if I had it to do again I'd drill it out. Jim On Jun 29, 2004, at 8:58 PM, Jonce Fancher wrote: > Hi all > im in the process of removing the swiss cheese exhaust system from my > 84 7 passanger van with only 20 k miles. so after using a chisle and > center punch to cu the nuts off of 2 studs and thinking im golden the > last bolt after soaking for 2 weeks in PB blast snapped off2 threads > exposed from the head. so now i have a forzen partial bolt in the head > of the # 1 cylinder upper. the question is what should i do to remove > it?? Mig something to it and beat on it with the heat from migging and > the extra grip that i added i just turn it out right?? what ive done is > wire brushed it to remove all corrosion and dirt then soaked with more > PB Blast waiting for me to come up with a grand idea to remove it. any > suggestions? or FAQ pages? thanks Jonce > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.