Of course, if we are talking alloys here, we are not talking about Aluminum. With Steel, we are not talking about an element, we are talking about an alloy. I am not familar enough to know how much of a market pure rolled aluminum has, I would suspect most 'Aluminum' sheets are some type of alloy. And then there is 'tin' foil.
tim in san jose ----- Original Message ----- From: "Stan Wilder" <wilden1-1@sbcglobal.net> To: "Aristotle Sagan" <killer_jupiter@HOTMAIL.COM>; <vanagon@GERRY.VANAGON.COM> Sent: Wednesday, June 30, 2004 1:46 AM Subject: Re: Re: Curious Question (NVC)
> OK Back to timing belts on this one. > I'm not the person to be specific but there are different types of Aluminum > Plate just as there are different types of steel and stainless. They will > have varying Rockwell hardness and strength characteristics. > Some are specific for machining, some are billets to be melted for castings, > some are soft for extrusions, some are Alloys for specific strength > requirements. > I'd suggest that you ask the local aluminum distributor for his > recommendations. > > Stan Wilder > > ----- Original Message ----- > From: "Aristotle Sagan" <killer_jupiter@HOTMAIL.COM> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Tuesday, June 29, 2004 3:33 PM > Subject: Re: Curious Question (NVC) > > > > I am an engineer, compooter though, so purely a guess eminating from the > dim > > reaches of Chemestry101. The thermal qualities should be the same, the > > strength qualities should be radically different from the process of > > manipulating the billet in the rolling and tempering processes the AL > > undergoes. > > > > I think the heat transfer should be the same as you have not changed the > > electron structure of the material, just how it's aligned. > > > > tim in san jose > > > > > > >From: John Rodgers <jh_rodgers@BELLSOUTH.NET> > > >Reply-To: John Rodgers <jh_rodgers@BELLSOUTH.NET> > > >To: vanagon@GERRY.VANAGON.COM > > >Subject: Curious Question (NVC) > > >Date: Tue, 29 Jun 2004 14:43:17 -0500 > > > > > >I'm not an engineer, but have a question. > > > > > >Cast aluminum has a granular crystal quality in it's structure. Milled > > >Aluminum (hammered, rolled) does not. > > > > > >Of two identical parts, one a machnined aluminum casting, and the other > > >machined in milled aluminum, which would most likely have the best 1) > > >strength 2) heat transfer properties. > > > > > >Inquiring minds would like to know! > > > > > >Anybody?? > > > > > >Thanks, > > > > > >John Rodgers > > >88 GL Driver > > > > _________________________________________________________________ > > MSN Movies - Trailers, showtimes, DVD's, and the latest news from > Hollywood! > > http://movies.msn.click-url.com/go/onm00200509ave/direct/01/ > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.