If you are going to do this, just loosen the nut so that it is flush with the end of the stud. This spreads the load and protests against damaging the threads either by compression of the end of the stud or missing and hitting the threads. On Tuesday, July 13, 2004, at 08:30 PM, Automatic digest processor wrote: > From: Simon Reinhardt <simon@FARRSIDE.NET> > Subject: Re: Wiper Arms > > Something that can work is to remove the 10mm nut, then give the > threaded stud a rap with a hammer. > > -Simon |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.