Hi all: I always have a difficult time figuring out what ETKA is telling me when it comes to hoses. The fabric-covered rubber hose that comes off the Decel Valve and then connects to the clear plastic hose that then connects to the "T" elbow on the left rear of the air distribution box is shot on my '82. (Manual trans vehicle.) In looking at ETKA (Model: VA, Year: 82, MG: 1, SG: 33, Illustration: 27-00) it seems like the hose I'm seeking is Item 3 in the illustration which is identified as Part N 904 023 01. This part further carries the designation "14x4". Do you agree that this is the correct part? I ask because the orientation of the various bits in Illustration 27-00 doesn't seem to be correct (e.g., the Decel Valve is pointing the wrong way). And, just to refresh my memory, is the designation "14x4" indicating that the I.D. is 14mm, with the wall thickness being 4mm, such that the O.D. is 22mm? Thanks! --------------------------------------------------------------- Tom Young '81 Vanagon Lafayette, CA 94549 '82 Westfalia --------------------------------------------------------------- |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.