Date:         Mon, 12 Jul 2004 16:32:10 EDT
Reply-To:     Shultze@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ed Shultz <Shultze@AOL.COM>
Subject:      Re:       firing order
Comments: To: antelopewesty@ADELPHIA.NET
Content-Type: text/plain; charset="ISO-8859-1"

Kevin,

The firing order should be 1,4,3,2.

If you are standing at the back of the van,
#1 is top right side
#4 is bottom left side
#3 is top left side
#2 is bottom right side

The distributore rotates clockwise.

looking down at the top of the distributor, the wire orientation should look 
like this:

          32
          41

-Ed
'87 Syncro
New Hampshire


In a message dated 7/12/04 12:01:39 PM, antelopewesty@ADELPHIA.NET writes:


> Hi Everyone,
> Just about done with a complete cooling system overhaul with head gaskets,
> motor mounts, rad, fan switch,most coolant hoses, thermostat, water pump,
> major engine detailing, ect.  Just want to make sure I have the firing order
> right on the dizzy for an 87 Westy 2.1 . I'm pretty sure this is how it
> should be on the dizzy but just want to double check as I don't normally
> take off all 4 wires at the same time and my brain is no longer thinking.
> 
> 
>                                  31
>                                  24
>