Date: Tue, 13 Jul 2004 22:21:49 -0400
Reply-To: ROBERT DONALDS <donalds1@VERIZON.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: ROBERT DONALDS <donalds1@VERIZON.NET>
Subject: Re: Back on the road but running warm or faulty gauge
Content-Type: text/plain; charset="Windows-1252"
if the lower fan speed is not working then the outter rubber head gaskets
will last about 2 years at the most
B Bob
----- Original Message -----
From: "Kevin" <antelopewesty@ADELPHIA.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Tuesday, July 13, 2004 7:58 PM
Subject: Re: Back on the road but running warm or faulty gauge
> Hi Everyone,
> So my mechanic had a black temp switch instock so I gave it a shot.
What's
> $12 more? Gauge still staying the same. I'm wondering where should this
> thing be running in the summer? Should the normal temp be just above the
> LED in 80f weather? In traffic should it reach the 3/4 mark and then the
> fan kick on? I boiled my 2 thermostats and they both work. I just don't
> want to do any long term damage because it's running too hot. I will
pick
> up a infrared gun tomorrow as it seems a useful tool for pin pointing
> problems but I am wondering if I even have a problem at this point. Seems
a
> little scary that the van would get to the 3/4 in regular traffic what
> happens in a major traffic jam for hours? Please let me know where you
guys
> are all running on your coolant temp gauges.
> Thanks
> Kevin
> 87 Westy
>
> -------------------------------------------------------------------------
> Sounds like it is working properly to me. A lower temp fan switch will
> help to turn on the fan sooner but it is not necessary. Get an infrared
> temp gauge to see what temps you really have as the gauges are not
> always consistent but it is difficult to fix something that is not
> broken.
>
> Dennis
>
>
> --------------------------------------------------------------------------
--
> ----
> Hi Everyone,
> One week after the start of the project I'm back on the road. So here
> is
> the deal. Motor sounds great! No leaks. But my coolant gauge still
> rides
> just above the LED and the low speed fan comes in traffic at about 3/4
> up
> the gauge. Now I can't seem to get any more air out of the system at
> all so
> I feel it is bleed correctly as heat works perfect and I have not had to
> add
> any coolant yet. Now in theory there should be no way for it to be
> running
> hot as I have a new T-stat, pressure cap, rad, rad fan switch, low speed
> resistor (figure it was $30 insurance and now I have a spare) most
> coolant
> hoses, head gaskets water pump and that's just coolant system restore
> did
> lots of other stuff as well. Now the old rad did have some crap in it
> but
> it is running the same with the temp just above led like one needle and
> in
> traffic at about 80f in traffic the temp will go up to 3/4 and the low
> speed fan kicks in. Not sure what to do next? Any tips on this one
> would
> be great. Thanks for everyone's help so far. Hoping to get this settled
> so
> I can go to greyfox on sat.
>
> Kevin
> 87 Westy
> Burlington VT
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.716 / Virus Database: 472 - Release Date: 7/5/2004
>
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.716 / Virus Database: 472 - Release Date: 7/5/2004
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.716 / Virus Database: 472 - Release Date: 7/5/2004
| 
