Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2004, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 20 Jul 2004 14:08:53 -0500
Reply-To:     Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Subject:      Re: CV Joint failure - New or Rebuilt?
Comments: To: Jim Kennedy <JK@PROJECTDESIGN.COM>
Content-Type: text/plain; charset="iso-8859-1"

As long as your CVs don't have broken bearing cages and both the inner and outer drives are unbroken you can easily get another 30,000 miles out of them if you keep them lubed up good. Porsche uses a seal to keep the grease in and that's not a bad idea since VW just skipped over it. If you got good Boots and lots of grease I doubt you'd ever have a complete failure ........... just noise.

Stan Wilder www.engineceramics.com

----- Original Message ----- From: "Jim Kennedy" <JK@PROJECTDESIGN.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Tuesday, July 20, 2004 1:00 PM Subject: Re: CV Joint failure - New or Rebuilt?

> I recently tried remanufactured CVs in my '87 and it was a nightmare. I'll > spare the details (quality issues). As we know, swapping CV's is not too > much fun. Buy new. This is money well spent. > > -----Original Message----- > From: Kurt Camealy [mailto:camealy@CTSR.COM] > Sent: Tuesday, July 20, 2004 10:14 AM > To: vanagon@GERRY.VANAGON.COM > Subject: CV Joint failure - New or Rebuilt? > > > I recently pulled my CV shafts after noticing a seat of the pants > vibration that was not tires or bearings. After taking them apart they are > heavily scored and get jammed when moving them around. I cleaned, repacked, > and reinstalled them as I had a trip to leave for, and the problem is still > there as expected. > So now should I buy a reman set of shafts for 85 a piece or a new set of > shafts for 120 a piece? I am not really a stickler as long as I get another > couple hundred thousand out of them. The first set going bad at 181K was my > fault for never repacking them. When I took them apart the grease was like > chunky clay. > > Thanks for any input, > > Kurt > 87 Wolfsburg GL


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.