Hi Rob, Well, I broke the mirror but I figured it out. The plastic trim rectangle that the switch slides in has 6 prongs on it. 3 across the top and 3 across the bottom. I had a spare visor and after warming it in the sun I used a very small screwdriver to push up from under the bottom edge. once I got the bottom three free the top three will disengage by moving the trim down a bit. Two bulbs inside. Hope that helps. Doug
----- Original Message ----- From: "Rob Campbell" <rob@phemp.com> To: "Doug in Calif" <vanagon@astound.net> Sent: Friday, July 23, 2004 1:19 PM Subject: Re: Replacing bulb in sun visor
> Sorry, cannot help but I have the same issue. If you get private > responses, please let me know. > > > Doug in Calif wrote: > > >Anybody know how to get at the bulb in the visor? > > > >I dont want to break the plastic trim around the mirror but one bulb is out. > > > >Ideas??? > > > >I checked the archives and could not find anything on this. > > > >Thanks, > > > >Doug > > > > > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.