Calle i try to tap from every angle that i can with out damaging/peening the bleeder screw. i use just a hammer, hammer on round stock or punches, hammer on wrench. i go for the hammer on wrench last as i don't like beating on my chromed tools anymore than i have too and then i generally use a brass or lead hammer. jonathan On Wed, 28 Jul 2004, Calle Fallberg wrote: > Just to clerify things - where do you tap ? > Iīve been taught to tap ever so gently on the end of the bleeder, itīs > supposed to get the thread to give up the fight a little easier ... > > Calle > > > i also recommend the wrench and tapping method mentioned earlier. i never > > try to turn any fastner that was exposed to the weather and is not known > > to be anti-seized without first tapping on it any more. > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.