Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (July 2004, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Wed, 28 Jul 2004 07:32:54 -0700
Reply-To:   Karl Wolz <wolzphoto@WORLDNET.ATT.NET>
Sender:   Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:   Karl Wolz <wolzphoto@WORLDNET.ATT.NET>
Subject:   Re: Broken bolt on torque converter
Comments:   To: Craig Oda <craigoda@GMAIL.COM>
In-Reply-To:   <b3a1e7ad0407272149567fa84a@mail.gmail.com>
Content-Type:   text/plain; charset="us-ascii"

Don't know about the automatic, but it is much easier to pull the standard tranny than to pull the engine.

Karl Wolz

> -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Craig Oda > Sent: Tuesday, July 27, 2004 9:50 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Broken bolt on torque converter > > After crawling around under the van I found a sheared bolt which looks > like it came from the torque converter. At least, I think it is the > torque converter. See here: > > http://oda.bz/vanagon/2004_07/ > > The van started making noises about 30 miles from my house and I drove > it home. It's on jack stands now and won't start. Sounds like > something is jammed in the metal plate shown in the picture. The > threads in the plate look damaged and I think there is a piece of > metal in there that was causing havoc. > > I plan to take out the engine to look at the plate this weekend. > > Is this the torque converter plate? I have an automatic transmission. > > If the plate is damaged, what should I do? Should I attempt to repair > it by sending it into a shop or buy a new one. How much would this > plate cost? > > Besides dropping the engine for further inspection, any other suggestions? > > I guess this puts a damper on my plans to go to Lake Shasta. Though, > if the plate is cheap and that's the primary thing that's damaged, I > can probably drop the engine, swap the plate out and jack the engine > back in over a weekend. > > Or, maybe this is too optimistic and I've got more serious problems > here because I drove the engine on the freeway for 30 miles after the > bolt sheared off? > > Thanks. > > Regards, > Craig


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.