Date:         Wed, 28 Jul 2004 20:37:46 +0200
Reply-To:     Calle Fallberg <calle.fallberg@TELIA.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Calle Fallberg <calle.fallberg@TELIA.COM>
Subject:      Re: calliper bleed screws
Content-Type: text/plain; charset="iso-8859-1"

Just to clerify things - where do you tap ?
Iīve been taught to tap ever so gently on the end of the bleeder, itīs
supposed to get the thread to give up the fight a little easier ...

Calle

> i also recommend the wrench and tapping method mentioned earlier.  i never
> try to turn any fastner that was exposed to the weather and is not known
> to be anti-seized without first tapping on it any more.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.