Malcolm, There's a concise description of the procedure on my website (www.vanagonparts.com) under the "Technical Section". Not too difficult a procedure. Cheers, Jeff www.vanagonparts.com
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf Of Malcolm Stebbins Sent: Thursday, July 29, 2004 3:45 AM To: vanagon@GERRY.VANAGON.COM Subject: Re: Brake problem -- UPDATE
My brakes have too failed and after an exhaustive reading of the archives, I'm convinced that my van's (91 syncro) master brake cylinder has also failed. Georgios, do you have a step by step write-up of the procedure for swapping out the brake master cylinder?? I could not find a step by step write-up in the archives. malcolm
--- "Georgios A. Stylianides, PhD" <gstylia@TEMPEST.COEDU.USF.EDU> wrote: > So, I replaced the master cylinder. Big difference in both braking and no spongy effect at the > stop lights.
__________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.