Date:         Sat, 31 Jul 2004 00:51:06 -0400
Reply-To:     John Runberg <jrunberg@MAC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Runberg <jrunberg@MAC.COM>
Subject:      I4 conversion -- wiring diagram/help
Content-Type: text/plain; charset=ISO-8859-1

The conversion has started. Step 1: trace the wiring harness...

Our donor engine came complete from a 90 Golf, but with the wiring harness removed. I've begun tracing the wires, however was wondering if there are any diagrams out there besides the Bentley. Also, does anyone have a write-up of what each pin is for on the Digifant II ecu connector? Before it'll run I'll need to plug everything back in!

Any help is appreciated. In the mean time, tomorrow I'll visit the yards and take notes.

john

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.