Date:         Fri, 30 Jul 2004 12:49:11 -0700
Reply-To:     Robert Lilley <RClilleyjr@COX.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Robert Lilley <RClilleyjr@COX.NET>
Subject:      Re: Exactly which filter for pre-pump retrofit?: SUM  FOUND ONE!!!
Comments: To: "Phillips, Andrew" <phillips@isgs.uiuc.edu>
In-Reply-To:  <537CB9DDD9077549945D568618BDCA0B030BB469@isgs1pdc.isgs.uiuc.edu>
Content-Type: text/plain; charset="us-ascii"

Just remembered that CP Performance sells one for $9.95



http://cbperformance.com/catalog.asp?ProductID=314



Robert



  _____

From: Phillips, Andrew [mailto:phillips@isgs.uiuc.edu]
Sent: Friday, July 30, 2004 12:01 PM
To: Robert Lilley
Subject: RE: Exactly which filter for pre-pump retrofit?: SUM



Did that, been there. None of them fit the bill. Even looked at tractor
filters. There was one high-performance metal one that cost about $30.



Thanks, though,

Drew





-----Original Message-----
From: Robert Lilley [mailto:RClilleyjr@cox.net]
Sent: Friday, July 30, 2004 1:38 PM
To: Phillips, Andrew
Cc: 'Vanagon Mailing List'
Subject: Exactly which filter for pre-pump retrofit?: SUM



Why not just go down to a local Pep Boys, AutoZone, etc. and look at the
wall of fuel filters and find one that has a large enough inlet and outlet?
Then you can just post the part number.  They have a number of metal
filters.



Robert