hey all, my LED green light to indicate my propane pilot is burning is very dim at best. so i went to radio shack today to find a replacement. i found a cool blue led that looks identical to the green stcok bulb. however when i installed it the LED replcemetn would not work. i then reinstalled the green buldb and tyhat still works. i tried a second blue LED (i bought 2 just incase...) and that would not work either. what is the right type of bulb to work here? it seems like a low voltage circuit board and most any bulbs should work. does anyone have better info, i really liked the blue bulb and would like to go with that. the bulb i purchased at radio shack is a high out put 5mm infrared LED, output is 16mW min. forward voltage is 1.2v, forward current is 100mA. are these not correct for the westy sicuit board? TIA for any inout jason 87 syncro westy _________________________________________________________________ Discover the best of the best at MSN Luxury Living. http://lexus.msn.com/ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.