Date:         Sun, 1 Aug 2004 10:09:51 -0700
Reply-To:     MC <gipsyflies@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         MC <gipsyflies@COMCAST.NET>
Subject:      Re: Factory cruise control
Comments: To: laurasdog@WEIRDSTUFFWEMAKE.COM
Content-Type: text/plain; charset="US-ASCII"

P.s. When I refer to the photos in the my shop manual, I cannot see the
speed sensor so it is very likely the sensor is only there if you have
cruise.

It should be very easy to check is the sensor is reed or hall effect:
1) unplug the two-wire harness that connects to the sensor.
2) monitor the sensor with a DMM set to measure resistance.
3) drive down the road very slowly and count the closures of the switch.
If you see no closure, it must be hall effect.


- Vince

-----Original Message-----
From: MC [mailto:gipsyflies@comcast.net]
Sent: Sunday, August 01, 2004 10:06 AM
To: 'laurasdog@WEIRDSTUFFWEMAKE.COM'; 'vanagon@GERRY.VANAGON.COM'
Subject: RE: Factory cruise control


I have the cruise in my 89. In my recent to find a speed sensor to use
with my GPS I found the cruise sensor. It is right at the speedo cable
that attached to the instrument cluster. You can see it at plain sight
as soon as you remove the plastic cover on the dash. I didn't check to
see if it is reed swtich or hall effect. Give the era I suspect it is
likely reed also for the reason of cost.

I haven't hook up the GPS yet other wise I can tell you the pulses per
rev.

Hope this help.

- Vince

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Steve Delanty
Sent: Friday, July 30, 2004 7:03 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Factory cruise control


Can someone tell me what years the factory cruise control
was offered?

Is the speed sensor in the speedometer just a reed switch
that closes to ground 4 times per revolution?
Or is it something fancier? (Hall effect?)

Thanks!

Steve
'86 Westy "Escape Pod"
'73 Beetle "ain't got a name yet"