VANAGON archives -- August 2004, week 1 (#359)

Date:         Thu, 5 Aug 2004 14:44:20 -0700
Reply-To:     BenT <syncro@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         BenT <syncro@GMAIL.COM>
Subject:      Re: Sliding door extended swing
Comments: To: John Rodgers <jh_rodgers@bellsouth.net>
In-Reply-To:  <411295E5.6000506@bellsouth.net>
Content-Type: text/plain; charset=US-ASCII

Brian & John,

There was a US vendor for these at $230 each. I got mine done by a
local welder. Cost about $75 plus my old hinge. FYI, there's more to
it than just the extension. You also need to modify the catch.

BenT
http://members.aol.com/bentbtstr8/myhomepage/index.html

On Thu, 5 Aug 2004 15:17:41 -0500, John Rodgers
<jh_rodgers@bellsouth.net> wrote:
> I would like to know of a source for these as well.
>
> Thanks,
>
> John Rodgers
> 88 GL Driver
>
>
>
> Brian T. wrote:
>
> >I recall being able to buy a longer sliding door swing
> >arm someplace, but can't remember the vender.
> >
> >Anyone know where you can buy one of these?
> >
> >Thanks,
> >Brian

Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.