Date:         Thu, 5 Aug 2004 19:15:05 -0700
Reply-To:     The Shaws <mindthegap01@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         The Shaws <mindthegap01@COMCAST.NET>
Subject:      Oil Dip stick level indicator
Content-Type: text/plain; charset="iso-8859-1"

I hope this is taken seriously, I just checked the oil in my 87 2.1L and
there was no oil on the dipstick, yikes.. so I am looking at the dipstick
and there is no real indicator of where the oil should be.

The dipstick has a slight twist about an inch from the bottom and I assumed
that at the top of the twist was the full mark. So I put in a quart of oil
and it shows up on the dipstick about an inch above the twist. Too much oil
is a bad thing but what to do?

Yikes, so I look at my other engine and the dipstick is different and comes
in at an angle instead of almost straight down. No help there.

So, do I drain the oil and add the recommended amount of oil and see where
it comes to? I was hoping to hit the road bright and early in the am.

Thanks,

peter