Date: Sun, 1 Aug 2004 22:11:03 -0400
Reply-To: Eric Zeno <vw4x4@FYI.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Eric Zeno <vw4x4@FYI.NET>
Subject: Re: Heater "T" pipe...
In-Reply-To: <011f01c4767f$2c2a2460$06caa8c0@karmannghia.comn>
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sorry thoughts of my mistake over took reading clearly....
Eric 86-VW4x4
vw4x4@fyi.net 86-SS Syncro
Pittsburgh, PA USA 1936-Chrysler
92-Jetta GWC
www.fyi.net/~vw4x4/vw4x4.htm
On Fri, 30 Jul 2004, Jim Thompson wrote:
> Hmmmmmm.....I didn't say Home Depot, I said Bus Depot - see below
>
> Trying to keep me on my toes Eric?
>
> Jim Thompson
> oldvolkshome@earthlink.net
> jim@karmannghia.com
> http://www.oldvolkshome.com
> ***********************
> ----- Original Message -----
> From: "Eric Zeno" <vw4x4@FYI.NET>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Friday, July 30, 2004 1:34 PM
> Subject: Re: Heater "T" pipe...
>
>
> > If you get any plastic parts from home depot, I would be careful
> > to make sure it could take the heat of the cooling system.
> > I had a problem with this.
> > On the other hand I have a spare heater line tee if you want it.
> >
> > Eric 86-VW4x4
> > vw4x4@fyi.net 86-SS Syncro
> > Pittsburgh, PA USA 1936-Chrysler
> > 92-Jetta GWC
> > www.fyi.net/~vw4x4/vw4x4.htm
> >
> > On Fri, 30 Jul 2004, Jim Thompson wrote:
> >
> > > Hi Zoltan -
> > >
> > > Etka shows VW # is 253-265-593 A, dunno what material, metal or plastic
> VW
> > > sells on this one.
> > >
> > > Bus Depot sells 'em for $3.30, but I'm sure Ken at Vanagain.com or Jeff
> at
> > > Vanagonparts.com has 'em as well.
> > >
> > > 86-91 uses 253-265-593 B, which I imagine is plastic.
> > >
> > > Jim Thompson
> > > 84 Westfalia 2.1 "Ole Putt"
> > > oldvolkshome@earthlink.net
> > > jim@karmannghia.com
> > > http://www.oldvolkshome.com
> > > ***********************
> > > ----- Original Message -----
> > > From: "zolo" <zolo@FOXINTERNET.NET>
> > > To: <vanagon@GERRY.VANAGON.COM>
> > > Sent: Friday, July 30, 2004 8:22 AM
> > > Subject: Heater "T" pipe...
> > >
> > >
> > > Hi guys,
> > > I think, the best is if I counsult the Honorable List. The question is,
> > > where do I get those T pieces that are residing next to the starter in
> my
> > > '85 Westy. Being made of steel, they now have deteriorated and a small
> leak
> > > has sprung at one of them. It is time to change them. I looked around
> in a
> > > FLAP store but did not find any. I suspect, it would be made of plastic
> > > now. I did not ask the dealer yet though.
> > > Any good thoughts on this?
> > > Zoltan
> > >
>
|