I've heard that Northwest Connecting Rod company in Seattle area is about the best around for VW, Porsche. They're not internet folks. Get their phone from information. Stan Wilder www.engineceramics.com ----- Original Message ----- From: "Tom Young" <tomyoung1@COMCAST.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Tuesday, August 10, 2004 3:30 PM Subject: SF East Bay Machine Shops?
> Hi all: > > I pulled the head off of one of my vehicles due to somewhat low compression > on that side and notice that one of the spigots (head/barrel interface) has > an irregular wear point. Otherwise the head looks to be in pretty good > shape. I'd say this head needs a compression cut here to clean things up. > > Anybody in the SF East Bay area do good work on TypeIV heads? > > TIA. > --------------------------------------------------------------- > Tom Young '81 Vanagon > Lafayette, CA 94549 '82 Westfalia > --------------------------------------------------------------- |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.