Date:         Sat, 14 Aug 2004 14:23:02 -0700
Reply-To:     Leon <korkwood@WSHOST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Leon <korkwood@WSHOST.NET>
Subject:      CV joint
In-Reply-To:  <001601c481d4$93f25a80$d728b83f@computer>
Content-Type: text/plain; format=flowed; charset=iso-8859-15

Servicing CV joints i noticed that some joints had 1 groove on one
side and 3 on the other side.Made by GKN. Joints were installed with 3
grooves outside.Is it correct?
I have used mostly Lobro joints with just one groove and it
is installed with that groove outside.
Just want to make sure i install it correctly if it matters of course
TIA
Leon
85 Subwagen

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.