Ed as far as i know the temp I sensor is the intake air sensor in the afm. do you mean the coolant temp sensor that send the signal to the coolant temp gage in the instrument cluster? if thats what you are talking about its a resister that varies the resistance to ground with temperature. if you ground the lead to the sender the gauge should go all the way to hot. jonathan On Tue, 17 Aug 2004, Ed Shultz wrote: > Does anyone know how to test the Temp I sender for a 1.9L or Syncro engine? > It's the single pin type. Is it a thermistor? or does voltage change? My temp > gauge stopped working. I need to start troubleshooting. I have the Bentley > manual, but there are no specifics. > > Thanks, > > Ed > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.