On Sun, 15 Aug 2004 13:01:07 -0700, Michael Diehr <md03@XOCHI.COM> wrote: >I'm Looking for a step-by-step instructions (hints, tips, whatever) >for replacing all high pressure fuel lines & clamps on a 1.9l. >Thanks! > >Also, are there any "must do" repairs when you have all that stuff off? I just did this with the kit that Vanagain sells. It comes with instructions, proper stainless steel clamps, and right length of hose. Fairly straight forward job. That little piece of line in front of the fire wall was the hardest to get. I also used a dremmel tool to cut the old clamps off. Pascal 84 Westy |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.