Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2004, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 16 Aug 2004 21:31:11 -0400
Reply-To:     Pascal Giasson <pascal.giasson@GNB.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Pascal Giasson <pascal.giasson@GNB.CA>
Subject:      Re: How to replace fuel hose?

On Sun, 15 Aug 2004 13:01:07 -0700, Michael Diehr <md03@XOCHI.COM> wrote:


>I'm Looking for a step-by-step instructions (hints, tips, whatever)
>for replacing all high pressure fuel lines & clamps on a 1.9l.
>Thanks!
>
>Also, are there any "must do" repairs when you have all that stuff off?


I just did this with the kit that Vanagain sells.  It comes with
instructions, proper stainless steel clamps, and right length of hose.
Fairly straight forward job.  That little piece of line in front of the
fire wall was the hardest to get.  I also used a dremmel tool to cut the
old clamps off.


Pascal
84 Westy
Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.