Date:         Thu, 19 Aug 2004 16:07:56 -0500
Reply-To:     "David J. Bohannan" <david.bohannan@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "David J. Bohannan" <david.bohannan@VERIZON.NET>
Subject:      Re: tranny fill etc
In-Reply-To:  <E15075B5-F220-11D8-BA80-000A95E94AAC@uvic.ca>
Content-Type: text/plain; charset="us-ascii"

LOL, I was under there looking all over...and couldn't find it on top...
:-)

-----Original Message-----
From: Alistair Bell [mailto:albell@uvic.ca]
Sent: Thursday, August 19, 2004 3:47 PM
To: David J. Bohannan
Subject: tranny fill etc

I misspoke, (just back from hols!) drain plug on underside of necked
down part of tranny, fill on the side. remove fill first!

ab


On 19-Aug-04, at 1:07 PM, Alistair Bell wrote:

> there are two plugs, one on top at the necking down region, that's the

> fill port. remove that  before trying the drain one on the side.
>  its a 17mm hex to fit. check out the snap on tool on my site
>
> http://www.members.shaw.ca/albell/wrench.html
>
> can also use suitable sized bolt head to fit plug.
>
> Alistair
>
>
> '82 westy, diesel converted to gas in '94
>
> http://www.members.shaw.ca/albell/