Date:         Sat, 21 Aug 2004 13:54:53 -0400
Reply-To:     ROBERT DONALDS <donalds1@VERIZON.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         ROBERT DONALDS <donalds1@VERIZON.NET>
Subject:      Re: Auto tranny slipping
Comments: To: Rocket J Squirrel <j.michael.elliott@ADELPHIA.NET>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=response

Rocky J.
two things to do
 check the atf filter
and adjust the throttle linkage if the arm on the side of the trnay is in
the wrong position then the trany can slip
start with the throttle cable to the arm making sure it tight  then the
linkage from the arm to the throttle body
Bob Donalds

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.