Date: Tue, 24 Aug 2004 21:20:37 -0500
Reply-To: Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Stan Wilder <wilden1-1@SBCGLOBAL.NET>
Subject: Re: DC Refrigerator Alternatives
Content-Type: text/plain; charset="iso-8859-1"
I always start my trips with a big bucket of ice in the fridge the day
before and I turn on my computer CPU fan that is inside the fridge. Coupled
with about 24 hours of 120v operation and the contents pre cooled that I put
in there it works pretty good and will freeze the munchkin ice trays once a
day even if I open the door a few times.
You need to check the fit of the door seals since they get hard and leak.
I carry a good co0leman cooler with bags of ice and better still are the
Omaha Steaks or Honey Cure Ham styrofoam shipping boxes to keep ice for
about three days.
Stan Wilder
www.engineceramics.com
----- Original Message -----
From: "Rocket J Squirrel" <j.michael.elliott@ADELPHIA.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Tuesday, August 24, 2004 8:08 PM
Subject: Re: DC Refrigerator Alternatives
> Stan Wilder wrote:
>
> >That all sounds real good.
> >What I see as the weak link is that the door opens and the cold dropps
out.
> >If the Westy fridge was just flipped over on its little backside it would
> >become a good bucket to hold the cold.
> >The refrigeration unit would work just as hard but the fridge would stay
> >colder.
> >
> I wonder how much "cold" is "stored" in the air inside the reefer, and
> how much is "stored" in the food, etc. It might not raise the temp of
> the food to cool the new air that has come into the reefer during a door
> open/close cycle.
>
> Mike "Rocket J Squirrel" Elliott
> 71 VW Type 2 / 84 Westy: A poor but proud race.
> KG6RCR
>
>
> >----- Original Message -----
> >From: "Michael Elliott" <j.michael.elliott@ADELPHIA.NET>
> >To: <vanagon@GERRY.VANAGON.COM>
> >Sent: Tuesday, August 24, 2004 7:33 PM
> >Subject: Re: DC Refrigerator Alternatives
> >
> >
> >
> >
> >>Vince S wrote:
> >>
> >>
> >>
> >>>A new subject to better reflect the content.
> >>>
> >>>Here is a self-contain complete system built with Danfoss BD35F if you
> >>>provide your own fridge box such as modifying the existing Dometic
> >>>cavity and put this unit in the small cupboard adjacent to it.
> >>>
> >>>http://www.sailnet.com/store/item.cfm?pid=30527
> >>>
> >>>
> >>>
> >>>
> >>Hmmm. I'm trying to wrap my head around this one. My Westy is on some
> >>truck miles from here right now, so I can't take a measuring tape to it
> >>-- how thick is the insulation on the stock reefer?
> >>
> >>Power consumption for this unit is expressed as average run time X power
> >>input. Power input is said to be 45 to 60 watts (why the range?).
> >>Average run time for 2'' polyurethane insulation is 40% . This affords
> >>an internal temp of 41F with outside temp of 80F. Worst case with these
> >>numbers would be 60W X 40% =24W =2 ampere/hr @ 12 volts.
> >>
> >>Did I do that right?
> >>
> >>Given the largest battery that can fit under the driver's seat -- how
> >>quickly would it become discharged at 2Ahr?
> >>
> >>And this Danfoss BD35F-based Waeco Coolmatic Cooling Kit . . . the
> >>"larger picture" is the same low-rez picture on the linked page (above),
> >>just scaled larger so there isn't really more information. It is larger,
> >>though, so they ain't lying. What I can't quite figure out is where the
> >>hot air is meant to be dumped. If you mount the compressor in the small
> >>cupboard adjacent to the fridge box, I reckon the heat would have to be
> >>vented outside somehow?
> >>--
> >>
> >>Mike "Rocket J Squirrel" Elliott
> >>71 VW Type 2 / 84 Westy: A poor but proud race.
> >>KG6RCR
> >>
> >>
> >
> >
> >
> >
|