My oil light does not work. I have replaced the LED light in the dash, and I know it is good. I took the wire going to the oil sensor off, got a wire, and took it to ground with the key on. No light. Where the connector in the dash , plugs into the harness, which wire is it, that feeds that LED? I am going to run a wire from the motor to dash. I need to know what wire it is that powers the LED,and splice into it ,to see if I have a bad wire going from the dash, to engine. I hope someone has a clue, on this one, hate knowing that the idiot light is not there to warn the idiot behind the wheel(mainly me), and then I blow up the motor when not looking at the aftermarket gauge |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.