Date: Tue, 24 Aug 2004 00:39:06 -0400
Reply-To: Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject: Re: [Syncro] Re: dual battery isolator
In-Reply-To: <JBEOJOBKGBDBEAIBOCBEIEDKDJAA.syncrowestytd@mindspring.com>
Content-type: text/plain; charset=US-ASCII
These devices are very good. Again, whether using this type of device or
relay, the charge effect will be the same as the alternator will
determine the charge capacity. If both banks of batteries get the 14
volts, then each will take the current it requires. A heavy duty, 150 RV
style relay (looks like a Ford solenoid) coats about $15-$20.
Dennis
-----Original Message-----
From: Westyman [mailto:syncrowestytd@mindspring.com]
Sent: Tuesday, August 24, 2004 1:05 AM
To: VWVANFULLTIMERS@yahoogroups.com
Cc: Vanagon list; Syncro list
Subject: [Syncro] Re: dual battery isolator
Dennis,
Thanks, good info to know. I really wasn't aware of the voltage drop
issue,
among others. How do you feel about Hellroaring's isolator-combiners?
they
claim less than .005 volt drop. http://hellroaring.com/bic75150.htm I
really
don't see a relay system keeping proper charge on tow batteries so
widely
different.
And yes, this is getting expensive just to keep food cool, but a cooler
is
out of the question for the month-long trips I take, in both the
constant
need for ice and space limitations.
Karl
-----Original Message-----
Although many folks have had success with conventional isolators, they
are
overall a bad idea. Yes they can be more reliable than relays since they
avoid dirty or welded contacts, but they are inefficient. For starters,
after they get warm the actual voltage drop is closer to 1.1 volt. At 90
amps, the isolater is dissapating almost 100 watts. This is why they
need
heat sinks. You are paying for this power. Now, with this voltage drop,
you
are getting less than 13 volts to the batteries and accessories. Ok, so
now
you can modify the regulator to increase the voltage or use a remote
sense
wire to compensate. At full load the limiting factor of an alternators
capacity is its own resistance. Thus at full load, it is only slightly
more
than 50% efficient. Yes, 1/2 the power produced is given off as heat in
the
alternator itself. That is why they have a big fan and they still get
hot.
So, we increase the voltage of the alternator by 1.1 volt so at 90 amps
the
alternator dissipates an additi
onal 100 watts of heat. Can we say shorter life? So at full load, we are
wasting ~200 watts of power due to the use of the isolator. Under ideal
conditions, 1 HP = 746 watts. Not that you will notice but we are
wasting
.26 HP here. The big issue here is the load on the alternator.
Dennis
If you would like to modify your subscription settings (including
unsubscribing), visit:
http://groups.yahoo.com/group/Syncro
Please remember that rude or offensive language is not allowed on the
Syncro list. Please try your best to resolve differences privately and
keep them off the list.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Syncro/
<*> To unsubscribe from this group, send an email to:
Syncro-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|