Date:         Wed, 4 Jul 2012 17:26:45 -0500
Reply-To:     Jack Botts <johnnyjewel43@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jack Botts <johnnyjewel43@HOTMAIL.COM>
Subject:      Re: trouble fitting new Gowesty LP tank
Comments: To: support@gowesty.com
In-Reply-To:  <8CF282093F217E8-E48-1D722@webmail-d079.sysops.aol.com>
Content-Type: text/plain; charset="iso-8859-1"

I would suggest calling GoWesty with your problem (probably not today, tho'). I have talked with them about things like this before and find them to be very helpful.
 > Date: Wed, 4 Jul 2012 13:21:27 -0400
> From: spencervw@AOL.COM
> Subject: trouble fitting new Gowesty LP tank
> To: vanagon@GERRY.VANAGON.COM
> 
> Just purchased a new GOWESTY propane tank but am having trouble mounting it onto the studs. The old one came right out with no problems so I figured the new one would slide right in. I can get 3 of the notches in the two brackets to line up but left forward notch will not line up completely at about 0.25" from sliding on to stud. I'm afraid to try and bend the stud over a bit and don't want to enlarge the notch in the bracket. Eyeballing the bracket it seems to be straight but could be welded on at a slight angle. Anyone have some tips for mounting this thing or run into this problem before? Thanks for any help.
> Spencer
> 85 Westy