Date:         Wed, 4 Jul 2012 14:40:30 -0700
Reply-To:     Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM>
Subject:      Re: trouble fitting new Gowesty LP tank
Comments: To: neil n <musomuso@GMAIL.COM>
In-Reply-To:  <CAB2RwfgdqVcCwnhotu=WeJFBMJPa2Y_1-dB=3s+e8bB9CTOv0A@mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

In my mind, not likely that the 10mm stud got bent, or can be easily bent.
Sure sounds like an aftermarket part that does not fit really. ( not
that uncommon all all, in my experience. 'Most don't' I could almost
say  ) ..

a die grinder with a small bit  on it is perfect for removing a little
material from the side of a hole or slot.


On 7/4/2012 11:35 AM, neil n wrote:
> If you have your old tank, maybe measure new against old? Can't hurt to
> check.
>
> Maybe that LH forward stud got bent when old tank removed? Like bent toward
> the front of vehicle? A small combo square held between each stud and floor
> might confirm.
>
> Neil.
>
> On Wed, Jul 4, 2012 at 10:21 AM, Spencer Allen <spencervw@aol.com> wrote:
>
> Just purchased a new GOWESTY propane tank but am having trouble mounting it
>> onto the studs. The old one came right out with no problems so I figured
>> the new one would slide right in. I can get 3 of the notches in the two
>> brackets to line up but left forward notch will not line up completely at
>> about 0.25" from sliding on to stud. I'm afraid to try and bend the stud
>> over a bit and don't want to enlarge the notch in the bracket. Eyeballing
>> the bracket it seems to be straight but could be welded on at a slight
>> angle. Anyone have some tips for mounting this thing or run into this
>> problem before? Thanks for any help.
>> Spencer
>> 85 Westy
>>
>
>
> --
> Neil n
>
> 65 kb image Myford Ready For Assembly  http://tinyurl.com/64sx4rp
>
> '88 Slate Blue Westy to be named.
>
> '81 VanaJetta 2.0 "Jaco"  http://tubaneil.googlepages.com/
>
> Vanagon VAG Gas I4/VR Swap Google Group:
>
> http://groups.google.com/group/vanagons-with-vw-inline-4-cylinder-gas-engines
>