Date:         Tue, 31 Aug 2004 20:47:20 -0700
Reply-To:     David Marshall <vanagon@VOLKSWAGEN.ORG>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Marshall <vanagon@VOLKSWAGEN.ORG>
Subject:      Re: how do make a gauge read lower
Comments: To: Mark Cumnock <kayakwesty@YAHOO.COM>
In-Reply-To:  <vanagon%2004083122473227@GERRY.VANAGON.COM>
Content-Type: text/plain; charset="iso-8859-1"

What is the make of the gauge - sometime more resistance is a higher
setting, sometimes more resistance is a lower setting.  VDO is pretty
'standard' when it comes to the Vanagon.  Adding more resistance between the
sender and the gauge will lower the reading - so a variable 1000 ohm
potentiometer is all that you will need to 'fine tune' your gauge.

David Marshall

Fast Forward Automotive Inc.
4356 Quesnel-Hixon Road
Quesnel BC Canada  V2J 6Z3

http://www.fastforward.ca    mailto:sales@fastforward.ca
Phone: (250) 992 7775        FAX: (250) 992 1160

- Vanagon Accessories and Engine Conversions
- Vanagon, Transporter and Iltis Sales and Importation
- European Lighting for most Volkswagen models


Due to the large volume of email  we  receive,  PLEASE  include  previous
emails when responding.  This will allow us to read the complete dialogue
in one message and will result in quicker and more  accurate  responses.


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of Mark Cumnock
Sent: August 31, 2004 7:46 PM
To: vanagon@GERRY.VANAGON.COM
Subject: how do make a gauge read lower


I have an aftermarket gauge that i want to read lower, how do I make it
happen, do you use a resistor in line?

it is a 12volt water temp gauge, that i am using as an oil temp gauge,
that I wish read about 1/3 lower, the upper end is where is reading and
once i use the ir thermometer, i will know what is what, but with my eyes,
i need the gauge to read a little lower..

any ideas???