Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (September 2004, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Tue, 7 Sep 2004 07:41:42 -0700
Reply-To:   Damon Campbell <damoncampbellvw@YAHOO.COM>
Sender:   Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:   Damon Campbell <damoncampbellvw@YAHOO.COM>
Subject:   Re: Replacing expansion tank hoses
Comments:   To: David Rose <DavidRose@RCN.COM>
In-Reply-To:   <000501c494de$f4ed27d0$8900a8c0@julian>
Content-Type:   text/plain; charset=us-ascii

Hello David,

Chances are, in addition to rotten expansion tank lines, you have a rotten crossover tube on top of the tank, as well. To do this job right, you really do need to drop the tank, but the whole process will take absolutely no more than an easy 4 hours if you havn't done anything like this before. It is easy, and you can get all the parts necessary from any of the vendors. When pulling off the visible braided hose, it is best to gently cut them off the plastic nips on the expansion tank jugs, rather than simply pull them off.

Ken Wilfey has a write-up of this procedure, as well as all the parts, on his vanagain.com site.

Good luck, and this is one of the excellent and easy repairs to make on your van...

-Damon

--- David Rose <DavidRose@RCN.COM> wrote:

> Hi All, > > I have a 1987 Vanagon camper. The hoses on the > expansion tank are rotting > out. Gas spills out if I do a fill. I called a > local dealer and the parts > guy was not even able to tell me the diameter of the > hoses. I called several > online parts places and nobody could tell me > anything about the hoses or > what is involved in replacing them. > > I have a few questions... > How much of a pain is this to fix? > Do I have to pull the gas tank to replace all of the > hoses? > What type of hoses do I use? (looks like I will not > be get at all of them if > I use the type that needs a clamp) > > Thanks for any info. > > David Rose >

===== '84 Westy (Sparky) w/2.3L WBX (well... it was worth a shot. And now it is.) Vancouver, BC

__________________________________ Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! http://promotions.yahoo.com/new_mail


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.